Typical elements 2


Since we’ve already discussed the use of simple element in the proof of the ergodic theorem, we will now address the existence of such elements.

Recall that we are working with a measure preserving system ([0,1]^{\mathbb{N}}, \mathcal{C}, T, \nu) as defined previously, where T denotes the shift operator. We are looking for an element \alpha of [0,1]^{\mathbb{N}} such that

\displaystyle \lim_{n\to \infty} \sum_{i=0}^{n-1} f(T^i \alpha ) = \int_{[0,1]^{\mathbb{N}}} f(y)d\nu .

for any f \in C([0,1]^{\mathbb{N}}). First, take a sequence \{ \alpha_n \}_{n \in \mathbb{N}} in [0,1]^{\mathbb{N}} of elements  that are periodic; in other words, each element is of the form

\displaystyle \alpha_n = (\alpha_{1}^{n} , \alpha_{2}^{n} , \dots , \alpha_{c_n }^{n} , \alpha_{1}^{n} , \alpha_{2}^{n} , \dots, \alpha_{c_n }^{n} , \dots )

for some integer c_n. We set

\displaystyle \mu_{\alpha_n } = \frac{1}{c_n } (\delta_{\alpha_n } + \delta_{T  \alpha_n } + \cdots + \delta_{T^{c_{n-1} }\alpha_n } ),

where  \delta denotes the Dirac measure, as usual. We require that the \mu_{\alpha_n} converge weakly to \nu as n\to \infty.

Here we depart from the sequence of the proof in Kamae in order to first show how to construct such a sequence, before showing that we can use it to obtain a typical element. To show the existence of the sequence, it suffices to show that for any neigbourhood U of \nu in the weak topology of Borel measures on [0,1]^{\mathbb{N}}, we can find an element \beta such that \mu_{\beta}\in U. The nature of the topology means that we can approximate the measure \nu to an arbitrary degree by considering a finite amount of information. In other words, there are integers m, n and some positive \delta >0 such that if | \mu (B) - \nu (B) |<\delta   for any subset B of the form

\displaystyle \left[ \frac{j_0}{m} , \frac{j_0 +1}{m} \right] \times \cdots \times \left[ \frac{j_{n-1}}{m} , \frac{j_{n-1}+1}{m} \right] \times [0,1] \times [0,1] \times \cdots

where j_0 , j_1 ,\dots ,j_{n-1} are integers ranging from 0 to m-1, then \mu \in U.

Now set

\displaystyle \Sigma = \left\{ \frac{1}{2m} , \frac{3}{2m} , \dots , \frac{2m-1}{2m} \right\} .

We can define a measure \lambda on \Sigma^n by

\displaystyle \lambda \left( \left( \frac{j_{0} + \frac{1}{2}}{m} , \dots , \frac{j_{n-1} +\frac{1}{2}}{m} \right) \right)  = \nu \left( \left[ \frac{j_{0} }{m} , \frac{j_{0} +1}{m} \right]  \times \dots \times \left[ \frac{j_{n-1} }{m} , \frac{j_{n-1} +1}{m} \right] \times [0,1] \times \dots \right)

for the j_i in the same range as before. We can see \lambda as an encoding of the measure \nu on cylinder sets of the form we are considering, and will clearly be used to construct a measure in the neighbourhood of \nu, once we have tweaked it a little.

We are given that \nu is T-invariant. From this, we can conclude that

\displaystyle \sum_{\xi_0 \in \Sigma} \lambda ((\xi_0 , \chi_1 ,\dots , \xi_{n-1} )) =\sum_{\xi_0 \in \Sigma} \lambda ((\xi_1 , \dots , \xi_{n-1} , \xi_{0} )). \quad  (*)

for any \xi_1 , \dots \xi_{n-1} \in \Sigma. Why? We have that

\displaystyle \bigcup_{\xi_0  \in \Sigma}  \left[ \frac{j_0}{m} , \frac{j_0  +1}{m} \right] \times \cdots \times \left[ \frac{j_{n-1} }{m} , \frac{j_{n-1} +1}{m} \right] \times [0,1]  \times [0,1]  \times \cdots \\ = T^{-1} \left(  \left[ \frac{j_1 }{m} , \frac{j_1 +1}{m} \right] \times \cdots \times \left[ \frac{j_{n-1} }{m} , \frac{j_{n-1} +1}{m} \right] \times [0,1] \times [0,1] \times \cdots   \right) ,

and the latter term is equal to

\displaystyle \bigcup_{\xi_0  \in \Sigma} \left( \left[ \frac{j_1 }{m} , \frac{j_1 +1}{m} \right] \times \cdots \times \left[ \frac{j_{n-1} }{m} , \frac{j_{n-1} +1}{m} \right] \times \left[ \frac{j_0 }{m} , \frac{j_0 +1}{m} \right] \times [0,1]  \times \cdots \right) .

From \lambda, we want to obtain a measure \nu on \Sigma^n which satisfies:

(1) For any \xi \in \Sigma^n, N\eta (\xi) is a positive integer such that |\lambda (\xi) - \eta (\xi) |<\delta, where \delta has been specified earlier.

(2) The relation (*) holds for \eta in the place of \lambda.

These do not seem like very great demands on \eta, but we should still confirm that it can satisfy them. The first condition above requires that all the values \eta (\xi) are rational. This is not much of a challenge, because of the denseness of the rationals. We must just make sure that the adjustment from \lambda to \eta does not violate condition (1). We therefore need to make sure, also, that the rationals we pick not only satisfy (*), but also

\displaystyle \sum_{\xi_0 , \xi_1 , \dots , \xi_{n-1}\in \Sigma} \eta (\xi_0, \dots, \xi_{n-1}) =1 \quad (**)

(obviously, since \eta must still be a probability). Since there are only a finite number of elements of the measure space, we can ensure first that the latter condition holds, then ensure the validity of (*) by more adjustments, making sure any adjustments upwards are balanced by adjustments downwards to guarantee (**) This brings into question whether there will not be one of these adjustments that will turn the measure of one of these elements negative. But since we’re only dealing with a finite number of points of the measure space, and our adjustments are arbitrarily small, we must just make sure that none of the adjustments are as big as the least measure of any of the elements. If there are any elements of zero measure, we adjust the measure \lambda to avoid that, whilst still remaining close to $\latex \nu$.

Now pick a longest sequence \xi^0, \xi^1, \dots ,\xi^{r-1} of elements of \Sigma^n such that

  1. (\xi^{i}_{1}, \dots ,\xi^{i}_{n-1}) = (\xi^{i+1}_{0},\dots ,\xi^{i+1}_{n-2} for any i=0,1, \dots ,r-1 and
  2. |\{ i: 0\leq i < r, \xi^i = \xi \}| \leq N\eta(\xi) for any \xi \in \Sigma^n,

where \xi^i = (\xi^{i}_{0}, \dots , \xi^{i}_{n-1}) and \xi^r = \xi^0.

The first condition clearly has to do with the translation operator, and requires that the i-th element of \Sigma^n is the translate of the (i+1)-th element, with the last term of the element not dependent on the next element. Notice that there is nothing in the first condition which prevents “looping” the same sequence over and over again. If such were allowed, we would not be able to speak of the longest sequence, and so the second condition is introduced in order to limit the lengths.

Now, suppose that equality does not hold in (2), for some \xi, remembering that N\eta (\xi) is an integer, and also supposing that \eta (\xi) \neq 0. In that case, we will be able to extend the sequence to increase the term on the left-hand side (by using closed loops), contradicting the assumption of the longest sequence. Thus, we can conclude that equality holds in (2) for each \xi.

We define a periodic element \beta of [0,1]^{\mathbb{N}} with period n+r-1 by

\displaystyle (\beta(0), \beta(1), \dots ,\beta(n+r-2)) = (\xi_{0}^{0}, \xi_{1}^{0}, \dots, \xi_{n-1}^{0}, \xi_{n-1}^{1}, \xi_{n-1}^{2},\dots ,\xi_{n-1}^{r-1})

Thus, we have found a periodic element in the neighbourhood U of \nu for each U. Taking neighbourhoods U_n of \nu such that \cap_{n} U_n = \nu, denote each corresponding periodic element by \alpha_n. For t_1, t_2, \dots a sequence of positive integers increasing sufficiently fast, set

\displaystyle \alpha(n) = \alpha_m (n-T_m)

for any n\in \mathbb{N} with T_m \leq n \leq T_{m+1}, where T_0 = 0 and T_i = T_{i-1} +c_i t_i (recall that c_n denotes the period of \alpha_n). This gives us our desired typical element, and completes the argument.

References: 

Kamae, T., A simple proof of the ergodic theorem using nonstandard analysis, Israel Journal of Mathematics, Vol. 42, No. 4, 1982

Advertisement

One thought on “Typical elements 2

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s